Testing and commissioning plan. Appendix A 2019-01-25

Testing and commissioning plan Rating: 4,5/10 494 reviews

Appendix A

testing and commissioning plan

The plan requires the commissioning managers to meet with the construction team to foresee and plan for installation requirements specified by equipment manufacturers. Details of systems tests and procedures, assembly specific checklists, and testing and documentation responsibilities are incorporated in construction phase commissioning plans. All of the on-site commissioning test procedures and checklists are developed, and the commissioning schedule is coordinated with the construction schedule. Green building rating system compliance and other project requirements define the goals for energy and water consuming equipment; utility incentive programs are equipment specific and must be clearly identified, depending on what has been funded; pharmaceutical facilities must comply with the U. Detailed requirements relating to the timing of the various commissioning activities relative to the commissioning of other systems will be included in the commissioning specifications.

Next

Checkout, Testing, and Commissioning Plan

testing and commissioning plan

Deliverables relating to the administration of commissioning Operating effectiveness of seasonal-sensitive equipment and systems will be significantly affected by changes in temperature, wind speed, humidity and barometric pressure. This stage generally starts with a visual and mechanical inspection of the equipment to make sure that it was installed properly and that no damage occurred during shipping or installation. This is aimed at avoiding unnecessary infrastructure changes in the future, which of course saves money. A commissioning schedule is developed as a section of or appendix to a commissioning plan and is updated throughout the project. The Commissioning Plan establishes the framework for how commissioning will be handled and managed on a given project. Establish Testing and Inspection Plans A building cannot be expected to operate optimally if the personnel in charge of operating and maintaining the building systems are unfamiliar with how to service the equipment and do not fully understand how and why the systems operate the way they do. During the commissioning stage, all missing data will be added, so that it will be 100% complete prior to issuance of the Interim Certificate.

Next

Appendix A

testing and commissioning plan

For optimum project performance a single entity should lead the process from start to finish so that the overall process, principles, and objectives are constant. It will monitor progress of installation and the sequence of testing, commissioning, documentation, training. Each time it is revised, the revision number and date will also be revised. System documentation will be completed by the Commissioning Agent and submitted for review before verification or training begins. In this phase, the on-site commissioning plan is finalized. Factory testing provides the design team and commissioning agent with an opportunity to inspect and test the functional operation of the equipment before it arrives on-site.

Next

Commissioning on

testing and commissioning plan

This perception is not true. Training should be indicated on this schedule to ensure that that training does not conflict with testing. Through the use of the simulator, various failure scenarios were tested and the control sequence was modified so that the system operated per the requirements of the owner. The commissioning agent also may be responsible for overseeing the factory testing, confirming that the results meet the acceptance criteria, and documenting any deficiencies. This schedule will include a detailed training schedule so as to demonstrate that there will be no conflicts with testing. Typically contracted directly to the Owner. Acceptance of equipment and or systems lies solely with the parties normally granted this authority within the contract.

Next

Checkout, Testing, and Commissioning Plan

testing and commissioning plan

How will the systems be tested, inspected, and documented? It is the responsibility of the commissioning agent to confirm that the factory testing procedures are adequate or develop additional testing procedures to ensure that the equipment operates as required to meet the design intent. Production will be of professional quality and organized into several short modules to permit incorporation of changes. Having knowledge of key design decisions helped the commissioning agent to develop the validation testing procedures. After the project delivery team has determined the essential project performance requirements, goals for project quality, efficiency, and functionality can then be established, and the commissioning plan can be developed. Importance of the Commissioning Plan The Commissioning Plan is the master planning, management and communications tool relating to commissioning, setting out scope, standards, roles and responsibilities, expectations, deliverables, etc.

Next

Model commissioning plan sets out thorough procedures

testing and commissioning plan

On larger projects, it may be appropriate to employ a CxP under two separate contracts, one for the commissioning plan pre-design and design stages and another for the construction phase. They shall be completed in time to be used during pre-start-up inspections. Duration of these sessions will be as specified in the commissioning specifications, using space to be identified. It can also help building control officers understand and record the commissioning activities. The scope addresses the equipment to be commissioned, which can vary depending on programs. During the Warranty Period, it will be refined as required.

Next

Appendix A

testing and commissioning plan

Commissioning services normally include elements of program review, planning and managing the commissioning process, and witnessing and documenting commissioning of specified systems and assemblies. They will be witnessed by, and results certified by, the Designer. The suggested structure of the Commissioning Plan is as follows. The focus of commissioning efforts should be appropriate to a project's size, complexity, its housed mission, and an owner's risk management strategy. During the commissioning phase, revisions and refinements will be incorporated by the Designer, so that it will be 100% complete prior to issuance of the Interim Certificate. Once individual pieces of equipment or systems have been checked for conformance, start-up will be able to commence.

Next

Model commissioning plan sets out thorough procedures

testing and commissioning plan

Payments for commissioning This will be developed as detailed design progresses 11. . Separate manuals shall be compiled — one in French, one in English. A separate detailed schedule in day-by-day format will be provided by the Commissioning Agent for commissioning of all systems and equipment. Commissioning Provider Certification There are numerous commissioning certification programs in the industry. Wherever this occurs, the CxP discloses, in writing, the nature of the conflict and the means by which the conflict shall be managed.

Next

Model commissioning plan sets out thorough procedures

testing and commissioning plan

In this phase, the commissioning scope and budget for the project are determined, and a preliminary commissioning plan is developed identifying the role of the commissioning agent. Construction phase The construction phase is when the systems are manufactured, inspected, tested, and installed in accordance with the construction documents. Commissioning of an existing building that has never undergone commissioning is often referred to as retrocommissioning. Once the new primary systems were installed, they had to be tested and commissioned around a live data center. Due to the complexity of the electrical systems, the manufacturer developed a simulator for testing. It will be produced by the Designer as the design develops It shall be 90% complete prior to Tender Call. This page is about incorporating a project's performance requirements into a plan that defines the commissioning scope, process, responsibilities, budget, and documentation requirements.

Next

Appendix A

testing and commissioning plan

In the second step they would be tested as a system to verify their compatibility under load and various operating conditions, such as on generator power, where harmonics can sometimes be an issue. It will be further refined during the Warranty Period when all systems undergo fine tuning, set-point adjustments are made, etc. These drawings will comprise a combination of marked up contracts print information and updated contractor working drawings. The following is a list of on-site electrical systems to consider when determining the commissioning scope for a project. Recommendations Establish Goals for Quality, Efficiency, and Functionality The commissioning plan should be outlined at the same time that a project team. Exact systems shall be determined an a project to project basis. Critical facilities like data centers, call centers, and hospitals have more complex electrical distribution, standby, or emergency generation and other backup systems than a standard office facility, and therefore will require a more comprehensive commissioning scope.


Next